Pop Up Irrigation

Complete Lawn Watering System

With the Colibri system, Claber has introduced even in small green areas, such as terrace-house gardens, all the advantages of underground irrigation: convenience, water saving, and the well-being of lawn and plants, enhancing the garden. Colibri is very easy to install, without requiring digging or wiring.

A simple Claber battery water timer connected to a tap is all that is needed to give the garden the right amount of water at the right time, even when away from home or on holiday. A big Claber success, in line with the developments in gardening, living areas and lifestyles.

360° Pop Up Lawn Sprinkler

The Claber Rainjet 360° is an underground micro-sprinkler with low water consumption. Ideal for watering vegetable patches and small gardens, even at low pressure.

180° Pop-Up Lawn Sprinkler

The Claber Colibri 180° is part of Clabers Rain Jet irrigation system. It is an underground micro-sprinkler with low water consumption. Ideal for watering vegetable patches and small gardens, even at low pressure. Gear-driven device made from acetal resin. Stainless steel range adjustment screws. Gentle rain effect over a 180° semi-circular area.

Part of the Claber Rainjet pop up sprinkler system

The Claber Threaded Drainage Valve is compatible with the Claber Rainjet Irrigation systwem. It is used for automatic drainage of the hose circuit. Recommended for zones subject to cold winters.

With connector for 1/2" (13-16mm) hose.

Part of the Claber Rainjet pop up sprinkler system

The Claber Rainjet 1/2" Threaded Elbow Connector is partused for end line connection of Claber Rainjet underground micro-sprinklers with 1/2" (13-16mm) to main hose.

Pack of 2.

Part of the Rainjet pop up sprinkler system

Claber 1/2" Rain Jet Hose Threaded Adaptor to be used for direct connection of 1/2" (13-16mm) tubes to taps with 3/4" (20-27mm) thread.

Part of the Claber Rainjet pop up sprinkler system

Claber Rain Jet 3/4" Automatic Adaptor is used to connect the pressure reducer, 1/2” (13 - 16 mm) main hose adaptor, 1/4” (4 - 6 mm) threaded hose adaptor, and other accessories with 3/4” female thread to electronic timers.