Brass 4 Way Tap Connector.

This 4 way brass tap manifold provides you with 4 outlets from 1 tap including up to two with watering timers. Each of the outlets has a shut off valve to allow for multiple hose connections.

Hozelock Hose End Connector - 2050.

This product replaces Hozelocks Hoze End Connector - 2166

Used at both ends of the hose to provide a starting point for the hosing system

Hozelock Hose End Aqua Stop Connector - 2055.

The Aqua Stop connector has an internal valve that stops the water flow when an accessory is disconnected. This saves you having to go back to the tap to turn the water off when you are switching between accessories.

Hozelock Hose Repair Connector - 2100.

For repairing damaged hose, or permanently connecting two lengths of hose.

Hozelock 4 Way Tap Connector - 2150.

Includes 2 Free Hose End Connectors

Allows the water supply to be divided up into four outlets including up to two with electronic timers.

This is especially useful where you want to install a watering system but also want to use the exterior tap for other uses or would like to run multiple watering systems off one tap.

Hozelock Dual Tap Connector - 2155.

Allows two hoses to be connected to the same tap.

One or both can be selected or the water can be turned off.

Hozelock Flat Hose Adaptor - 2170.

Threaded adaptor with female connector and 3/4" BSP male thread.

Hozelock 3/4 inch BSP female thread tap connector - 2175.

For garden and garage taps with a male threaded outlet, the fitting screws to the tap to provide a quick coupling.

Complete with adapter for taps with 1/2 inch BSL (12.5mm).

Hozelock Round Tap Connector - 2176.

For standard round or oval spout taps, maximum diameter 18mm. The fitting is sealed to the tap by tightening the clip.

Hozelock Round Mixer Tap Connector - 2177.

Tap connector designed to suit the normally larger spout of a mixing tap. Maximum diameter of 24mm.

Hozelock Non-Return Valve- 2181.

All plastic double check valve used on outside taps to prevent backflow siphonage of contaminated water into the mains supply.

Hozelock Multi Tap Connector - 2274.

Designed to fit a wide variety of square, round and mixer taps up to 43mm high by 34mm wide.

Hozelock Accessory Adaptor - 2289.

Hozelock Accessory Adaptor - Threaded adaptor with male connector. Converts female threaded accessories to male end.

This part is especially usefull for connecting an automatic watering system pressure regulator to a standard Hozelock hose end connector.

Hozelock Double Male Connector - 2291.

Hozelock Double Male Connector

Hozelock Hose Nozzle with Waterstop.

Adjustable spray nozzle including a waterstop connector (2185)

Hozelock Y Connector.

Three-way connector designed to branch a hose in two directions.

Hozelock Spares Kit include O Rings and Washers - 2299.

Spares kit for Hozelock fittings, includes washers and 'o' rings.

Hozelock Watering Starter Set.

This Hozelock watering starter set includes all the fittings and accessories needed to start watering. Including a spray nozzle, hose end connector, waterstop connector and an outdoor tap connector

Universal Hozelock Hose Guide - 2392.

Mounts onto a wall or the corner of a building and guides the hose easily around, reducing the possibility of damage to the hose in use.

Hozelock Hose Connection Set - 6005.

The Hozelock connection set connects a hose system to an outside tap, complete with 1.5m hose, 2x 2166 hose end connectors and 2175 tap connector.

Brass 4 Way Manifold by Sunmate Orbit - 94070.

A solid brass 4 way manifold with 4 shut off valves. Connects directly to a tap and is ideal for use with upto 4 irrigation systems or hose outlets.

Brass 2 Way Manifold with Threaded Outlets by Sunmate Orbit - 94667.

A solid brass 2 way manifold with 2 shut off valves. Connects directly to a tap and is ideal for use with upto 2 irrigation systems or hose outlets.

The 3/4" BSP threaded outlets are ideal for connecting pressure regulators or timers where a screw connection is required.

Brass Hose Fitting, Quick Release with Auto Stop - 94677.

This Brass hose fitting is suitable for a standard 1/2" hose and offers both quick release and auto stop. The auto stop ensures that water does not flow through the connector whilst no attachement is connected.

Brass Hose Fitting, Quick Release - 94679.

This Brass hose fitting is suitable for a standard 1/2" hose and offers quick release.

Brass 3 Way Hose Connector by Sunmate Orbit - 94750.

This solid brass 3 way hose connector is a Y shaped connector that allow connections between 3 1/2" hoses.

Brass Double Male Hose Connector by Sunmate Orbit - 94751.

This brass double male hose connector allows you to connect two quick release hose connectors together. Ideal for connecting two lengths of hose together where quick and easy seperation is required.

Brass Tap Connector by Sunmate Orbit - 94752.

Brass tap connector to fit 3/4" BSP threaded tap or 1/2" BSP thread using included adaptor.

Brass Hose Repair Connector by Sunmate Orbit - 94753.

Brass hose repair connector suitable for connecting two lengths of standard 1/2" hose.

Brass 2 Way Manifold with Male Outlets by Sunmate Orbit - 94759.

A solid brass 2 way manifold with 2 shut off valves. Connects directly to a tap and is ideal for use with upto 2 irrigation systems or hose outlets.

Hozelock Garden Tap Kit.

The Hozelock garden tap kit contains everything you need for succesfull installation of an garden tap.
Includes a self cutting tap so there is no need to isolate the water supply when installing.
Comes complete with comprehensive instructions for easy installation by a competent DIYer.
Some basic tools are required for installation.